DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (2024)

Need some help figuring out how to support climbing houseplants in your home? I’ve got you covered! Today we’re looking at how to build a simple DIY indoor plant trellis for a large houseplant.

DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (1)

Earlier this week, I did a deep dive on my Rhaphidophora Tetrasperma – also known as my very favorite houseplant. Apparently, it’s this plant’s week to shine because today I’m back with a look at how I build a simple indoor plant trellis to help support it and keep it growing to its full potential!

I actually built a smaller trellis back in Febraury but she’s fully outgrown it at this point and it was high time for something new. I built a simple ladder-style trellis that should give her plenty of room to thrive. Of course, I don’t even know what I’m going to do when she reaches the top of this. I guess I have a few months to figure it out!

how to build an indoor plant trellis

video tutorial

I put together a quick video tutorial of how I built this little trellis. It gives a really detailed look at exactly how it came together, so be sure to watch if you’re more of a visual learner!

If you prefer to read, continue on for all the details on this indoor plant trellis! You can also check out this post on how to build a DIY blanket ladder – I used basically the exact same technique, and that post gives a couple of other styling ideas for you!

materials needed

step one: cut your 2x3s at an angle

First, decide how tall you want your trellis to be. For this particular trellis, I think it would look best at at least 4′ tall – for anything shorter, I’d build something with lattice boards like I did for the previous trellis this plant used.

I kept my boards at their full 8′ length because I want plenty of room for my plant to climb. However to help the trellis lean against the wall like a ladder, I cut the bottom of each board at a 5-degree angle using my miter saw. This is an optional step, but it definitely makes things look more polished!

If you’re building this for a blanket ladder, my recommendation would be to stick to 6′!

Cut Trellis Rungs

Once you’ve planned out the height of your trellis, it’s time to plan where you want the rungs of your trellis ladder to be. I put my first one about 18″ from the ground, and spaced the rest 17″ apart. If I was doing a shorter trellis, I would have spaced the rungs closer. For a 6′ trellis, I’d recommend starting at 18″ and doing 12″ for the rest of them!

I also cut my rungs into increasingly shorter lengths as I went up the ladder for a tapered look. The lengths of each rung from top to bottom are:

  • 18″
  • 17″
  • 16″
  • 15″
  • 14″

I measured for each rung as I went, knowing that I wanted to start at 18″ and end at 14″. However, for a similar taper and similar spacing, just reducing the length by 1″ for each rung is a safe bet!

drill pilot holes

Now you’re ready to start assembling! Mark a spot for each rung on your 2×3 boards, then pre-drill a hole at each point. Be sure to double check that your measurements are in the exact same spot on each of your 2x3s to ensure that your rungs are level!

You’ll also want to pre-drill pilot holes at the center point of each side of the trellis rungs. This will make the assembly process so much easier and faster!

Assemble + finish plant trellis

DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (2)

With the pilot holes drilled, you’re ready to assemble. Grab your screws and attach each rung to the trellis, starting with the longest rungs and working your way up to the shorter ones.

Once it’s fully assembled, you’re ready to finish it off with paint or stain! I chose to stain mine with Dark Walnut by Varathane (AKA my go-to stain for almost everything). If you want to learn how to stain wood, I’ve got a post for you! Of course, you can also paint it, or even do a two-tone look by painting half and staining half. Whatever fits your style and your home best will look great!

Once your trellis is complete, you’re ready to put it into place! I just used some plain ol’ twine to attach my plant to the trellis, but some plants will naturally have aerial roots that will grab onto it without any additional help. Just do whatever works best for your specific plant!

This method can easily be tweaked for a variety of looks and styles. Here are a few ideas for how you could switch things up:

  • Do all of the rungs the same width for a more modern and streamlined look
  • Use 1x2s for the rungs instead of dowels
  • Use thinner boards for the side pieces (a 1×3 would look super sleek and modern!)
  • You could also do a more dramatic taper by increasing the difference in the widths of the rungs

Play around with different styles and see what works best for you! This indoor plant trellis could also be used as a blanket ladder, of course, if that’s more your style.

DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (3)
DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (4)
DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (5)

I’m excited to see how quickly my Rhaphidophora Tetrasperma fills up this new plant trellis – you know I’ll keep you super updated over on Instagram, so be sure to follow along if you want to see how things go. And, once she reaches the top of this trellis I’ll be back to let you know how I end up deciding to continue to support her to reach her full potential – I hear they can grow up to 12′ tall, so that’s definitely what we’re aiming for here!

Need some more plant display ideas? Here are a few posts you may love!

  • A tour of all of our houseplants
  • 10 plants for beginners
  • Rhaphidophora Tetrasperma deep dive
  • DIY cinderblock plant shelves
  • Turning a ladder into a plant display
  • DIY window plant shelf
  • WallyGro wall planter review
  • DIY outdoor plant wall
DIY Indoor Plant Trellis {Easy DIY Ladder} - Love & Renovations (2024)
Top Articles
Latest Posts
Article information

Author: Velia Krajcik

Last Updated:

Views: 5423

Rating: 4.3 / 5 (74 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Velia Krajcik

Birthday: 1996-07-27

Address: 520 Balistreri Mount, South Armand, OR 60528

Phone: +466880739437

Job: Future Retail Associate

Hobby: Polo, Scouting, Worldbuilding, Cosplaying, Photography, Rowing, Nordic skating

Introduction: My name is Velia Krajcik, I am a handsome, clean, lucky, gleaming, magnificent, proud, glorious person who loves writing and wants to share my knowledge and understanding with you.