The iron lung was large, cumbersome and very expensive,but itsaved the lives of thousands of polio victims.
Imagine the terror of not being able to breathe because your lung muscles are paralysed. You're gasping for air as the medical team slides you into something that looks like a coffinon legs. They seal you in up to your neck and a strange 'whooshing' sound starts somewhere in the room. Then, relief! Your lungs pull in fresh air and you find you're breathing again.
The coffin-like cabinet respirator—better known as the 'iron lung'—was the state-of-the-art inlife support technology in the first half of the 20th century.The firstiron lungwas used at Boston Children's Hospital to save the life of an eight-year-old girl with polio in 1928.
What was the iron lung for?
Incidents of poliomyelitis (polio)began to rise to epidemic proportions across Europe and North America, reaching their peak in the United States in 1952, with 57,628 cases in one year.
One of the worst symptoms of acute polio was muscle paralysis. If paralysis affected the chest muscles, the patient couldn’t breathe unaided and might die. Researchers looked to technology for a way to keep these patients alive.
The solution came from ateam at Harvard University. The'iron lung', as it was nicknamed, wasa huge metal box attached to bellows in which the patient was encased. The continuous suction from the bellows kept the patient breathing.
It soon became a feature of the polio wards of the mid-1900s. By 1939, around 1,000 iron lungs were in use in the USA.
Who invented it?
Philip Drinker and Louis Agassiz Shawinvented the first iron lung at Harvard School of Public Health. It consisted of a huge metal box with a set of bellows attached at one end to pump air in and out. The whole body was enclosed in an airtight chamber, apart from the head. A tight rubber seal supported the neck and ensured that air did not escape.
Mechanical breathing apparatus were not a new idea, but the huge scale of the polio epidemics motivated researchers to come up with adevice.
In 1931,John Haven Emersonimproved on the ‘Drinker’ design by improving access to the patient. He made the bed slide in and out of the cabinet and added portholes to the sides allowed access to the patient without loss of air pressure.
Drinker and Harvard University felt that the Emerson respirator was too similar to the original and sued Emerson for infringing on their patents. In court, Emerson's lawyers demonstrated that all the technologies used by Drinker already existedand so could not be patented.
United States Patent and Trade Mark Office
Emerson won the case and all the patents were declared invalid. The judge also agreed with Emerson that a technology that saved lives should be shared by everyone.
A few years later, the Both Respirator was born of necessity. When a polio epidemic broke out in Australia in 1937, the cost of buying and transporting Drinker Respirators all the way from America was so high that the South Australian Health Department asked biomedical engineerEdward Bothto come up with a cheaper alternative.
The Both respirator was made of plywood. It was not only cheap, but alsoeasier to construct and transport. In some cases, the Both was in use within one hour of production. Lord Nuffield was so impressed with the Both design that he had around 1,700 machines built at his car manufacturing plant in the UK and donated them to hospitals around the world.
Examples of different iron lungs
How did the iron lung work?
United States Patent and Trade Mark Office
The respirator worked by pushing air into the lungs by method of artificial respiration called External Negative Pressure Ventilation (ENPV).
The bellows sucked air out of the box in which the patient was sealed. As the air pressure in the box fell, the patient’s lungs automatically expanded, drawing fresh air into the diaphragm.
When the bellows allowed air back into the box, the air pressure rose and the patient's lungs deflated passively, pushing air out of them.
The rhythmic ‘whoosh’ of air from the iron lung became the reassuring sound of patients breathing.
Image: A page fromPhilip Drinker's and Louis Agrassiz Shaw's patent for an artificial respirator. US Patent no. 1906453, 1933.
What was it like for the patient?
Going into an iron lung was a bewildering process for patients, many of whom were delirious and in extreme pain.
Lifein an iron lung was difficult for both patient and carers. The numerous tasks involved in treatingthe patient included:
- blood transfusions
- intravenous glucose feeds
- inserting and replacing catheters
- and endless adjustments to the body and equipment.
In addition to medical care, itches were scratched, noses blown, hair combed, bodies washedand bedpans inserted and removed, allthrough the portholes as far as possible.
When the portholes were inadequate, tasks such as physical therapy had to be completed in the few minutes that a patient could breathe on their own outside the iron lung.
AP / Steve & Mary DeGenaro / Boston Children’s Hospital Archive / AARC’s Virtual Museum Image source for Boy in an iron lung, his smiling face is seen in a mirror attached to the machine, 1930s-1950s.
One of the biggest problems for patients was boredom. A mirror could beattached above the patient’s head, so they could see what was happening around them. They could also read books suspended in front of their faces if someone turned the pages for them.
In larger iron lung wards they had other patients nearby to provide companionship and psychological support but visiting hours for family were limited.
Using dolls in polio rehabilitation
Polio particularly affected young children, and it was especially difficult for themto understand what was happening to them.Lord Mayor Treloar Hospital in Hampshire specialised in the treatment of children affected by tuberculosis and polio. They used dolls to explain what would happen to them during treatment.
How long did you spend in an iron lung?
Most patients only used the iron lung fora few weeks or months depending on the severity of the polio attack, but those left with their chest muscles permanently paralysed by the disease faced a lifetime of confinement.
Therapists used several techniques to help patients regain strength in their chest muscles. By slowly extending the time outside the cabinet the patient could gradually build up the muscles to the point where they could spend most of the day outside the iron lung,returning to it at night to givetired bodiestime to rest.
The technique soundsstraightforward, but in practice learning to breathe again was a difficult and frightening process, as one patient, Kenneth Kingery recalled:
I’d have to strain my every fibre for a breath of air. And there was always a helpless terror – wondering whether they’d close the tank in time.
Aschest muscle strength returned some patients were transferred to rocking beds, which used gravity to help with breathing. As the head of the bed tiltedupwards, gravity pulled the internal organsdownwards, drawing air into the lungs. When it tilted the other way, gravity pushed the internal organs up on to the diaphragm, pushing air out of the lungs.
The process of recovery could be long and difficult. In addition to rehabilitating the lungs, physical therapy in the form of ice packs, heat packs and massage were necessary to stop other unused muscles from atrophying.
Damaged muscles could take up to two years to recover maximum functionality, during which time the patient had to continue a rigorous regime of physical therapy and exercise.
Is it still used today?
Once an effectivepolio vaccinewas developed in the 1950s, the incidents of polio infection fell dramatically and only a very few machines were needed in hospitals. But for patients dependent on them to breathe, the old iron lungs were gradually replaced with modern ventilators.
Ventilatorsare used today in intensive care units and emergency wards rather than for polio victims. The patient no longer needs to be encased neck to toe in a coffin-like box. Not only do they have the advantage of allowing full access to the patient, they also monitorand record breathing and other vital signs.
Ventilators have also been used in surgery since the 1950s. Surgeons began to use drugs during operations to relax the muscles and make surgery easier, but relaxed chest muscles suppressed breathing, so a ventilator was needed to make sure the patient didn't stop breathing.
John Haven Emerson, of the Emersoniron lung, developed the first mechanical assistor for anaesthesia in 1949. It's still the job of the anaesthetist to operate the ventilator and monitor patient breathing.
Modern ventilators are compact machines that sit beside the bed. They use aPositive Pressure Ventilation Systems(PPVS), in which air is pushed directlyinto the patient's lungs via intubation of the airway—inserting a tube into the air passage.
But even the modern ventilation system is a legacy of the polio epidemics—the first PPVS device was developed Copenhagan, Denmark, for an outbreak of polio in 1952.
Suggested further research
- Natasha McEnroe (editor), Medicine: An Imperfect Science, 2019
- Edmund J Sass, George Gottfried and Anthony Sorem, Polio’s Legacy: An Oral History, 1996
- E Gould, A Summer Plague, Polio and Its Survivors, 1995
- Thomas MDaniel and Frederick C Robbins, Polio, 1997.
