What Is A Boston Shaker? Bar Tools (2024)

The Boston shaker is a two-piece co*cktail shaker, made of a metal tin and a mixing glass. One vessel is larger than the other. The mixing glass weighs 16 ounces, whereas the shaker tin weighs 28 ounces.

Referred to as the 'tin' by bartenders, it's by far the most popular co*cktail shaker and part of the bartending basics. Learn all about the Boston shaker history, use and co*cktails below...

Boston shaker history

What Is A Boston Shaker? Bar Tools (1)

The co*cktail shaker as a tool for mixing drinks hasa long, long history. co*cktail shakers, in their early form, were just tin cup with a smaller glass or other metal tin used to mix drinks.

Archeological evidence has been found, as far back as 7000 B.C., showing that drinks were mixed in vesselslarger than those we know these days. The Aztecs were also found to be using a 'golden cylinder-shaped container' to mix cacao drinks.

From here, the history of the co*cktail shaker is more related tomixing co*cktails. co*cktail shakers became a part of the bartenders' tool kit in the mid-nineteenth century. Before this, co*cktails were mixed by “rolling” the mixture between two cups. The theory is that one day someoneput these two vessels (of different sizes) together and shook the contents, probably for dramatic effect. The result was a co*cktail with a different mouthfeel andslightly different flavour profile too.The Boston shaker had officially been born!

The technique and co*cktail design was further refined over time into the Boston shakers we know today.

How to use aBoston shaker - 6 steps

What Is A Boston Shaker? Bar Tools (2)

Technically, you don’t need a specific co*cktail shaker to shake co*cktails. A Boston shaker or a Cobbler shaker both suffice. There are slight differences between both types of co*cktail shakers but it’s most down to the bartender’s preference. However, if you're using the Boston shaker, here’s our six steps to using a Boston shaker

Step 1

Take the two tins and fill the second, smaller tin full of ice and the co*cktail ingredients for the drink. This is the 'cheater tin', butyou can also use a pint glass.

Step 2

Position the other, taller tin at an angle over the lip of the smaller tin, containing the co*cktail elements. Hold the bottom tin and hit the top tin to create a vacuum seal between the two shaking tins.

Step 3

Place one hand on the Boston shaker with either your thumb or bottom two fingers over the base of the shaker. Place the other hand on the other half of the shaker, again placing your thumb or bottom two fingers on its base. This grip ensures that if both tins separate during shaking, they won’t fly across the bar.

Step 4

Now, shake vigorously for up to 30 seconds. The goal of shaking is to chill and dilute the co*cktail a little. Always remember this!

Step 5

Once finished, there are two methods you can use to separate the tins. The first method is to hit the side of the Boston shaker with your hand, to hear a pop signaling the separation. The second is to squeeze the bottom of the shaker just above the seal and pull it apart.

Step 6

To finish, place a Hawthorne strainer on top of the Boston shaker and engage it, so that it will double strain your co*cktail. Slowly pour out the co*cktail into a glass and serve.

NOTE: When shaking, never face the customer. Always face down the bar, to avoid accident if the tins separate.

There is no right or wrong way to shake a co*cktail.However, adjusting how long you shake for, how hard you shake and your shaking motionallows you to find your personal sweet spot for creating quality co*cktails.

Boston shaker vs Cobbler shaker: What's the difference?

What Is A Boston Shaker? Bar Tools (3)

The difference between the Boston shaker and theCobbler shaker is design. Boston shakers comeas two pieces. Astainless steel shaker tin and amixing glass/smaller tin. This co*cktail shaker does not come with a strainer. However, a benefit is that you'll be able to see the co*cktail during shaking, if using the glass.Plus, it's super easy to pick up a Hawthorne strainer to strain your concoction.

The Cobbler shaker, however, comes with a built-in strainer and is heavier to shake. This is called a ‘three-piece co*cktail shaker’, which includes a base, strainer and lid.

When it comes to types of co*cktail shakers, the Boston and Cobbler shaker are the only choices for bartenders (although there are slight variations on style). It's purely down to personal preference.

Boston shaker appearance

What Is A Boston Shaker? Bar Tools (4)

Since its inception, the concept of the co*cktail shaker has produced many patents that promised to make better co*cktails withmany functionless stylistic variations. However, thesimple, sleekshape ofthe Boston shaker still remains the king of co*cktail shakers.

The Boston Shaker consists of two vessels;a mixing glass and a metal tin. Most times the shaker comes with two stainless steel vessels, one larger than the other. Sometimes, the second smaller tin (called thecheater tin) is a pint glass. Both tinscan sometimes be coated with rubber or stained in a variety of colours like gold, bronze or copper. The stainless steel designis actually vital to the success of the co*cktail being shaken, helping to reduce the temperature inside the shaker and of the ingredients too.

When you're getting a Boston shaker,it’s probably going to come with either a 16oz pint glass or a cheater tin.However, remember that this co*cktail shaker comes without a strainer. You’re going towant to buy one to help you strain the co*cktail after shaking. The Hawthorne straineris perfectlydesigned to fit snuggly atop of a Boston Shaker and is our best recommendation.

Boston shaker co*cktails

What Is A Boston Shaker? Bar Tools (5)

In bartending there’s a saying, ‘you gotta shake it to wake it’. Some co*cktails have very heavy ingredients, like egg white, so by shaking you can really amalgamate the flavours. Below, we’ve provided a list of the most common shaken co*cktails that need a Boston shaker...

Dry Martini - some types of Martini canbe stirred, however.

Margarita

Aviation

Cosmopolitan

Daiquiri

Gimlet - can also be stirred.

Sour co*cktails (Whiskey Sour, Vodka Sour)

Sidecar

Learn more about co*cktails in our 'what is a co*cktail' blog. Covering co*cktail history, recipes and styles...

So, now you know what is a Boston co*cktail shaker, let's start using it behind the bar professionally. Check out our bartender course and start your journey...

What Is A Boston Shaker? Bar Tools (2024)

FAQs

What Is A Boston Shaker? Bar Tools? ›

The Boston shaker is a two-piece co*cktail shaker, made of a metal tin and a mixing glass. One vessel is larger than the other. The mixing glass weighs 16 ounces, whereas the shaker tin weighs 28 ounces.

What is a shaker used for in a bar? ›

A co*cktail shaker is a bar tool designed to assist in the preparation of co*cktails and mixed drinks. It acts as a closed vessel that allows you to quickly and thoroughly mix ingredients together while chilling the drink at the same time.

What tool is used with a Boston shaker to strain mixed drinks? ›

A strainer

Contrary to the Cobbler shaker, a Boston shaker has no built-in strainer, thus needing a separate strainer. The common choice is the Hawthorne strainer, which you place on top of the glass to strain your drink.

What is the tool bartenders use? ›

Every bartender should have the basics: a shaker, a muddler, a jigger, a strainer, and a bar spoon. With these items, they can mix almost any drink.

What is a Boston shaker in a bar? ›

The Boston shaker is a two-piece co*cktail shaker, made of a metal tin and a mixing glass. One vessel is larger than the other. The mixing glass weighs 16 ounces, whereas the shaker tin weighs 28 ounces.

What is a shaker used for? ›

A co*cktail shaker is a device used to mix beverages (usually alcoholic) by shaking. When ice is put in the shaker, this allows for a quicker cooling of the drink before serving.

Why do bartenders prefer Boston shaker? ›

When it comes to making shaken co*cktails, most experienced mixologists turn to the Boston shaker, which (generally) consists of two metal tins—one of which is inverted to form a seal. This style of shaker is prized for its simplicity: it's easy to use behind the bar, and even easier to clean.

How do you use co*cktail shaker tools? ›

How to use a three-piece co*cktail shaker
  1. Combine all ingredients in the base of the shaker.
  2. Fill two-thirds full with ice.
  3. Place the top and cap firmly on the base.
  4. Pick up the closed shaker with one hand on the top, securing the cap, and the other gripping the bottom, and shake vigorously.

Why is the Boston shaker called that? ›

Back in the 19th century, "Boston shaker" signified the smallest possible glass that would both hold the drink and form a seal with the tin. Oddly, the first known instance of its name actually referred to a catalogue listing for an all-metal shaker advertised in Britain in the 1920s.

Do you need a strainer for Boston shaker? ›

The Boston shaker consists of a shaking metal tin and a mixing glass tin but has no built-in strainer. For the Boston shaker, a strainer must be purchased separately, which is a Hawthorne strainer.

What can you use instead of a Boston shaker? ›

If you have a mason jar, any other glass jar with a lid, or even a water bottle—just about anything with a lid—it will serve as the perfect co*cktail shaker. Then add your ingredients, top if off with ice, close the lid and shake.

How long should you shake the drink when using the Boston shaker? ›

After shaking for around 12 seconds, hold the larger can in one hand and break the seal between the two halves of the shaker by tapping the base can with the palm of your other hand at the point where it meets the upper can (or glass).

Why does my Boston shaker leak? ›

Both have simple, but non-intuitive solutions. To close a shaker so that it doesn't leak when you're shaking, you need to ensure you have a tight seal. The best way to do that is to place the mixing glass right side up on your table, bar, or counter, with the liquid and ice inside the glass (not the tin).

How to break seal on Boston shaker? ›

If you hit the bar shaker from one side while pushing from the other side, you will allow air to rush in between the two tins, cracking the airtight shaker seal. Your stuck Boston shaker should pop apart right away, but it might take you a couple tries to get it.

What is the most used tool in a bar? ›

co*cktail shakers are one of the most important bar tools for mixing in-house drinks. Both classic mixed drinks and co*cktails are better when made using a co*cktail shaker. Beyond the taste, using shakers also helps create the bar ambience by making the drink preparation process exciting for customers to see.

Why do bartenders tap the bar? ›

Tapping the glass on the bar was a way to remove sediment before taking a gulp of that sweet dancing juice.” Amanda Wisth, who bartended at Joey's Yardarm in Racine explained that, despite its origins, tapping your shot glass is now used as a form of salute – like a nod of recognition.

What is bartender checklist? ›

Bartender Opening Checklist

Then they can proceed to go through the bar opening and closing checklist and complete the following tasks: Unlock beer and wine coolers. Unlock and inspect beer taps to ensure they are functional. Check bar inventory and restock any items if necessary. Place floor mats behind the bar.

Why do bartenders use shakers? ›

Showmanship aside, bartenders shake co*cktails for a number of reasons — to chill, dilute, or blend ingredients. Shaking even changes the texture of the co*cktail by incorporating the air that gives the beverage a frothy finish.

What is the shaker that bartenders use? ›

The most popular model named by professional bartenders is the Boston shaker, which usually comes as a set with a large shaking tin and a small tin (or pint glass) that fit together. With a Boston-style shaker, you'll need to use a separate strainer to pour your drink once you're done mixing.

What do you need a shaker for? ›

If you're going to make co*cktails at home on a regular (or even semi-regular) basis, we recommend buying a co*cktail shaker, which is absolutely critical for a proper Martini, Sidecar, and many other classic co*cktails.

Top Articles
Latest Posts
Article information

Author: Eusebia Nader

Last Updated:

Views: 5726

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Eusebia Nader

Birthday: 1994-11-11

Address: Apt. 721 977 Ebert Meadows, Jereville, GA 73618-6603

Phone: +2316203969400

Job: International Farming Consultant

Hobby: Reading, Photography, Shooting, Singing, Magic, Kayaking, Mushroom hunting

Introduction: My name is Eusebia Nader, I am a encouraging, brainy, lively, nice, famous, healthy, clever person who loves writing and wants to share my knowledge and understanding with you.